Category 6 UTP Keystone Jack is designed
for superior performance in high-speed data, voice and image
transmission. Includes 110-type IDC termination and comes standard
with 50 μinch gold plating on the jack contacts. Optiplus jacks are
fully compatible with Gigabit Ethernet and future applications.
Designed and engineered to exceed all ANSI/TIA-568-C.2 category 6
requirements. |
ANSI/TIA/EIA 568AB.2.2001 | |
ISO/IEC11801:2002 | |
EN50173-2 Category 6 standards | |
IEEE 802.af, IEEE 802.3at for PoE applications |
EIA/TIA 568A/B standard. | |
Multi-purpose keystone design | |
Protection cap protects conductor termination points and controls cable entry. | |
Balances signal transmission of insertion loss and crosstalk from 1 to 250MHz. | |
Suitable for 23-24AWG stranded and solid wire. | |
Colour
White/Black
Size
32mmX16mmX21mm
Orientation Angle
90 Degree
Housing Material
High impact thermoplastic, UL94V-0
IDC
Phosphor bronze with 50 micro-inch tin-lead plating over 50-60 micro-inch nickel plated
IDC Contact Area
Min 3mm 50 micro-inch gold plated over nickel plated
IDC Type
110 or low impact krone tool
Temperature -Storage
-40°C - +70°C
Temperature -Operation
0°C - +65°C
Colour Coding
As per 568 A/B standard
Insertion Life
750 cycles minimum
Retention Force
50 N
Propagation Delay : 2.5nsec max./1-250MHz
Current Rating
1.5 Amps
Insulation Resistance
500 M minimum
Maximum Contact Resistance
0.02
Maximum DC Resistance
0.1
PART NUMBER | DESCRIPTION |
OP-C6130090 | Category 6 UTP Keystone Jack |
OP-C6130080S | Category 6 UTP Keystone Jack with shutter |
New Products